Converts spline(s) to numbers of straight lines.
Menu : Express tools>Draw> Spline to Line
Command Entry : SPLINE2LINE
Once the command is started, the command line prompts as follows:
Select spline or [Set parameters(S)]: Select spline(s) or input "S" to set parameters
[The line precision/Starting point (S)<1.00>]: Input a new value bigger than 0 to join precision between segment lines
Conversion in a straight line to allow the greatest number of <5000>]: Input a new value smaller than 5000 to number of lines
At first, the system will fit the spline with a segment line which precision (Length) has been specified, if the line's number needed is more than the maximum number, the system will extend the length of the lines by force, using the maximum number of lines to fit the spline.
Select spline or [Set parameters(S)]: Then select the spline(s) to be converted and press Enter to finish the operation
Article ID: 2685
Created: December 1, 2021
Last Updated: December 1, 2021
Author: GstarCAD MY /KW
Online URL: https://www.kb2.gstarcad.com.my/article.php?id=2685